A Light in My World

Designed by Jeannie Phillips - Southside, AL

Click on any picture to enlarge.

This card came to me today when I was reading my daily Bible reading... the verse was Luke 11:34 "Your eye is a lamp that provides light for you body. When your eye is good, your whole body is filled with light. But when it is bad, your body is filled with darkness..."... I had the world and the lantern in my head but just couldn't figure out how to lay it out on my card... then I took a nap...and as many or you know a nap is when cards come together in my head... and when I say the background cuts in my head I woke up!!... and couldn't wait to get my card on paper... this is a very easy quick card!... I so hope that you like it!!.. I love your comments they mean the world to me!!... more than you could imagine... Hugs, Jeannie

Gypsy file available by e-mail at winacard@gmail.com

Just copy and paste the e-mail address into your own e-mail account.

CRICUT & GYPSY

Give A Hoot

Heart shaped globe and its layer cut @ w 2.75 x h 2.36... I welded the lantern shadow blackout to the globe cut and to both cuts of the globe..... on the Cricut I would cut these @ 2 1/4 inches...On the Circut I would cut two extra shadow blackout globes in the color of each piece and glue them onto the globe.

Campin Out

Lanterns and lantern layers cut @ w 0.83 x h 1.64... I went back and cut an extra for the inside... you could add these before you cut with the duplicate feature... on the Cricut I would cut these @ 1 1/2 inches.

Songbird

Frame behind the globe large one cut @ w 3.36 x h 3.18, smaller one cut @ w 3.08 x h 2.19...on the Cricut I would cut these at 2 1/4 inches and 3 1/4 inches... you will turn it sideways to put on your page.

"T" cut @ w 0.40 x h 0.70... you will have to unlink the width and height for this cut...on the Cricut I would cut this at 3/4 an inch.

Fabulous Finds

Bookplate found on the first row third purple button down and its shadow found on the second row and the third purple button down cut @ w 2.46 x h 1.0 ....on the Cricut I would cut this at

1 inch.

Two Little Sparrows

Designed by Jeannie Phillips - Southside,AL

Click on any picture to enlarge.

I was doing my daily Bible reading this morning and this card came to me... this was not one of my scriptures today... but this card all the sudden was in my head... I couldn't wait to make it!!... I think it will make a wonderful card of encouragement for somebody... what do you think??... thank you so much for looking and being an inspiration to me each and every day!... Hugs, Jeannie

Gypsy File available by e-mail @ winacard@gmail.com
Just copy and paste the e-mail address into the "to" of your own
 e-mail account.

CRICUT & GYPSY

Give A Hoot

Branch and it layers cut @ w 2.86 x h 2.0... I flipped one of the branches from top to bottom and welded them together... so be sure and flip a set of your layer... you need two layers per branch cut...one in the color of your leaves and one in the color of your flowers....I glued the end of the branch to the background paper and popped the branch where the flowers and leaves are.....on the Cricut I would cut these at 2 inches.

Create A Critter

Nest (2) cut @ 2.55 x h 1.14 inches...I cut two and popped one from the other...I popped the first one from the background at the top and adhered the bottom to the background paper... on the Cricut I would cut these @ 1 1/4 inches and overlap the end of the branches when I put them on the paper.

Home Decor

Bird and its layers (2) cut @ w 1.93 x h 1.21... on the Cricut I would cut these @ 1 1/4 inches.

Easter 2010

Cross cut @ w 1.07 x h 1.32... on the Cricut I would cut this @ 1 1/2 inches.

Walking God's Highway

Designed by Jeannie Phillips ~ Southside AL

Click on any picture to enlarge.

I found this paper ... its paper... so I had a bit of trouble... (remember to buy card-stock Jeannie...remember to buy card-stock!)...but it was so perfect for my son, John-Robert... it just screamed his name... let me tell you a bit about John-Robert... he started RA camp in the summer... a church camp... when he was 8... became a counselor a year before he was suppose to be eligible at 15...and now he is On-Site Director this is his 3rd year...and he is 22... he is so close to God... he has taught me so much about how to be close to God... if I have a God question I ask John-Robert... he has even preached...and I got to hear him...and it blew me away!!.... he loves sharing the fact that God loves us... and for Christmas he gave me a One Year Bible... I have not missed a day reading it...and it has changed my life... made me a much better Christian and a much better person... and I am so excited about the changes!!!... so this card is for John-Robert who walks God's Highway!!!

CRICUT & GYPSY

I am not including Cricut instructions on this card because of the welding...and the stretching of several of the objects.

New Arrival

Feet cut @ w 0.85 x h 1.0.. you will have to unlink the width and length for this....I stretched the length of the feet to make them look like adult feet.

Graphically Speaking

Arrow cut @ w 5.48 x h 2.53... you will also have to unlink the width and length for this cut... the bottom of the arrow is glued to the background the top is pop-dotted from the background.

Going Places
Highway Sign cut @ w 1.68 x h 1.64... I cut two in black and one in white...the white one I trimmed the center pieces out and adhered to one of the black pieced...the other black piece is popped from the background ...then the one with the white is popped for that.
George
letter I for the sign post cut @ w 0.39 x h 2.10
Learning Curve
"walking" cut @ h 1.0.. set the height and the width will be right... I welded these together....I cut two of these in black card-stock and one in paper and glued them all together to give a chipboard look.
"GOD'S" cut @ I put these on the mat at h 1.0... then I welded the letter together...and then I changed the group of letters to w 1.14 x h 0.96.

Noah's Ark

Designed by Jeannie Phillips ~ Southside, AL

Click on any picture to enlarge.

Adam is one of my Facebook friends because he and his wife took Madison's wedding pictures.... he saw my "Every Light in the House is On" mushroom card yesterday on Facebook and he asked me to make a birthday card for his wife... he lives a little more than an hour away and I explained to him that because I mail them in a bubble envelope they take longer to arrive than a day, he was willing to drive the hour or more  to pick up my card.... was that a compliment or what!!!.... so I got to work designing on my Gypsy last night...and the card came together so good this morning...I am just so excited about this card.... hope that Adam and his wife are happy with it!!... thank you so much for looking!!... Hugs, Jeannie

CRICUT & GYPSY

Life is a Beach

Waves cut @ w 2.74 x h 1.0...I overlapped 3 of these to get the length I needed grouped them and welded them together....I place a rectangle on the screen the size of my card base to measure this by.... on the Cricut I would cut these @ 1 inch.

For the second row of waves duplicate these waves and weld to a rectangle from George cut @

 w 5.17 x h 0.83... on the Cricut I would cut three waves and hand cut the rectangle at a little large than 3/4 and inch by 3 1/2 inches and glue a row of overlapping waves to this.

Paper Dolls for Every Day

Basket for bottom of boat cut @ w 3.50 x h 8.07.... I put two of these on my mat...cut on by itself..which I cut the handle off of and popped from the welded boat...the other boat I welded at square and a rectangle to it to make the house...on the Cricut I would cut the basket at 3 inches on real dial size...I would leave the handle on one of the baskets to glue the square and triangle to.

Elephant cut @ w 1.83 x h 1.68...I glued one giraffe to the back of the "tub"of the boat which is popped from the whole boat....the other I glued to the whole boat...this gave a space between each animal for dimension...on the Cricut I would cut these @ 1 3/4 inches.

Fish cut @ w 0.87 c h 1.02...you will only need 5 ...I glued 3 to the back of the front waves which are popped form the back waves... on the Cricut I would cut these at 1 inch.

New Arrival

Giraffes and their layers cut @ w 1.12 x h 2.46 ... I glued one giraffe to the back of the "tub"of the boat which is popped from the whole boat....the other I glued to the whole boat...this gave a space between each animal for dimension.... on the Cricut I would cute these at 2 1/2 inches.

Beyond Birthdays

Doves cut @ w 1.83 x h 1.68 inches....on the Cricut I would cut these @ 1 1/2 inches.

Doodle Charms

Sun cut @ w 2.11 x h 1.71 ...on the Cricut I would cut this @ 1 3/4 inches.

Stamping

"Happy Birthday" cut @ w 2.64 x h 1.32...on the Cricut I would cut this at 1 1/4 inches.

George

House on Boat

Square cut @ w 1.31 x h 1.50...using the Cricut I would cut this by hand at 1 1/3 inches x 1 1/2 inches.

Triangle cut @ w 1.94 x h 1 inch...using the Cricut I would cut this by hand  1 inch tall and 2 inches wide.

Rectangles 2 cut @ w 0.19 x h 1.58 ... rotate these and weld together to make the roof line... duplicate...then weld one set to the top of the roof...and cut one set separate so you can use a different paper for contrast... using the Cricut I would cut this by hand... and cut only one and glue to your roof.

All cut in red on the mat are welded together.

Every Light in the House is On

Designed by Jeannie Phillips ~ Southside, AL

Click on any picture to enlarge.

Today was a day of resting and getting healthy again... and you know if you have a Gypsy... you can't help but pick it up.... I have been wanting to use a mushroom cut from Paisley for a while... but am not the biggest fan of the extras that go on all the cuts... then I realized that I could just use the shadow for the mushroom...and this card was born... we have all see mushroom houses before so I know its not exactly original...but this is my version.. hope you like it... thank you so so much for looking and for your comments...they really keep me making cards!!  Hugs, Jeannie

CRICUT & GYPSY

Paisley
Mushroom (3) (shadow cut) cut @ w 3.67 x h 3.46...on the Cricut I would cut these at 3 1/2 inches.
Doodle Charms
Sun cut @ w 2.92 x h 2.73...on the Cricut I would cut this at 2 3/4 inches.
Walk in My Garden
Bee and its layers cut @ w 1.03 x h 1.09...I cut two complete bees in velum and the layer once in yellow and once in black... I trimmed the head and tail off the velum.. velum makes wonderful wings!...on the Cricut I would cut these @1 inch.
Snail and its layer (2) cut @ w 2.33 x h h 1.0 ... on the Cricut I would cut these @ 1 inch.
Easter 2010
Grass (short) cut @ w 1.59 x h 1.09... you will need 4 of these...to get the grass I place a rectangle the size of my background paper 4.75 x 3.5 in the mat... then I use 4 pieced of grass...two I flip from side to side... then I overlap them to get my width... group them and weld them together.... on the Cricut I would cut 4 of these @ 1 inch.... and overlap them on my paper for the effect.
Grass (tall) cut @ w 1.59 x h 1.59... you will need 4 of these...to get the grass I place a rectangle the size of my background paper 4.75 x 3.5 in the mat... then I use 4 pieced of grass...two I flip from side to side... then I overlap them to get my width... group them and weld them together.... on the Cricut I would cut 4 of these @ 1 1/4 inches... and overlap them on my paper for the effect.
*The easiest way to get the tall grass is to duplicate your welded/grouped short grass and unlink your width and height and change the height to 1.59 inches.
George
Door
Rectangle cut @ w 0.58 x h 1.15 cut two of these one in yellow for the light in the window...the other add your window square to it...but don't weld the squares to the door...just group them.
Squares for window in door cut @ w 0.26 x h 0.24.
Using the Cricut I would cut this with a paper trimmer... cut a rectangle 3/4 x 1 1/5 an inch and your squares at 1/4 x 1/4 and inch..cut your squares in yellow and glue to your rectangle door....this will give you the same effect.
Windows
Squares for window cut @ w 1.07 x h 1.0
Squares for window panes cut @ w 0.36 x h 0.34.
Using the Cricut I would cut this with a paper trimmer... cut 2 squares at  1 x 1  inch and your squares at 1/3 x 1/3 and inch..cut your squares in yellow and glue to your square window this will give you the same effect.

Sympathy Card

Designed by Jeannie Phillips ~ Southside, AL

Click on any picture to enlarge.

I woke up this morning... like at 2:30 this morning and picked up my Gypsy... and there it was in my head this card... so I laid it out to make today... then I work up again this morning at 7:30... and about an hour later I found out that this dear lady I know lost her mom... so this card is for her and her family... As many of you know I often pray for my cards.... and I have been praying each morning for a card... and I feel so much like my cards are a Gift from God... well this one... I especially feel that way about.... I hope that it brings this sweet lady a touch of comfort...thank you so much for looking!  Hugs, Jeannie

CRICUT & GYPSY

Songbird

Bookplate (small) cut @ w 2.84 x h 2.53 I popped this from the larger bookplate... on the Cricut I would cut this at 2 1/2 inches.

Bookplate (large) cut @ w 3.16 x h 2.81... I popped this from the background paper.....on the Cricut I would cut this at 2 3/4 inches.

Tie the Knot

Doves cut @ w 1.02 x h 0.80... on the front I layered one bird directly on top of the other to make it thicker...for a better effect.....on the Cricut I would cut these @ 3/4 an inch.

Easter 2010

Crosses (2) they are the shadow cut... cut  @ w 1.45 x h 1.78 ...I pop-dotted one the second one... the first one is behind that adhered directly to the paper...on the Cricut I would cut these @ 1 3/4 inches.
Heritage
Flourishes cut @ small w 1.74 x h 0.58..I cut two of these...one I trimmed some of it away for the flourish on the book plate....medium cut @ w 2.75 x h 0.92...large cut @ w 3.61 x h 1.21.... on the Cricut I would cut the small flourish @ 1/2 an inch... medium one at 1 inch.. and the large one @ 1 1/4 inches.
Christmas Solutions
Bows cut @ w 1.48 x h 1.36...these bows cut in twos..one a mirror image of the other...I cut 2 sets and trimmed the bow from the tails on one set...and popped the bow part from the second cut for the front...and on the inside I adhered the bow directly on top of the second cut.

Welcome to the Neighborhood

Designed by Jeannie Phillips ~ Southside AL

Click on any picture to enlarge.

I am so excited about this card...I am going to make one with a dear friend of mine Kara who I haven't got to see in a really long time... and I so love her and her company... and I am also going to make one with an old friend from high school, Deena... it will be fun to get-to-gather with her!!! I so hope that they both like the card!!... this card was totally inspired by the paper...when you scroll down and see the inside you will know that without a doubt... Thank you so much for looking.... and I so love your comments!!!... Hugs, Jeannie

*I was unable to include Cricut instructions with this card...I am so sorry.

CRICUT & GYPSY

George

Square for base of house cut @ w 2.05 x h 1.71... you will have to unlink your width and height to get these measurements.

Triangle for roof cut @ w 2.86 x h 1.49... unlink your width and height... duplicate this...and cut one separate... see mat shot.

I welded these two shape together... and I cut them in white then I duplicated this.

Rectangle for smoke stack cut @ w 0.41 x h 1.00 and rotated sideways... unlink your width and height.

Rectangle for top of smoke stack cut @ w 0.28 x h 0.69... unlink your width and height.

I welded these to the duplicated house.

Square for windows cut @ w 0.50 x h 0.44....cut one of these without the panes for the yellow in the windows.

Square for window panes cut @ w 0.17 x h 0.16... unlink width and height...do not weld to window so you will get the holes in the window.

Rectangle for door cut @ w 0.74 x h 0.90... cut one extra without panes for the yellow in the windows.

Squares for panes in door cut @ w 0.18 x h 0.19.. unlink the width and height.

Circle for tree cut @ w 2.45 x h 2.49.. unlink width and height.

Gypsy Wandering

Tree trunk cut @ w 1.82 x h 3.32... unlink the width and height.

Flower Stems cut @ w 0.55 x h 0.92.

A Child's Year

Tulips..made with teardrops cut @ w 0.41 x h 0.82... I cut one for the center for each flower...and then two ..the two I put one on the mat...rotated it out just a little..then duplicated this...and flipped from side to side.. overlapped with the one I duplicated this cut from and welded them together...then glue the single teardrop to the back.

Home Decor

Flourish cut @ w 1.10 x h 0.78...unlink width and height.

Serenade

Birds cut @ w 0.73 x h 0.58.

50th Anniversary

Designed by Jeannie Phillips ~ Southside, Al

Click on any picture to enlarge.

My dad called and said that he needed a 50th Anniversary card for my Uncle George and Aunt Carol... I wanted it to be special... I hope that this one is!!... My Uncle George was really there for me and my brother last year when my daddy was in ICU and almost died... he will always be special to my heart for that!!... than you so much for looking!

CRICUT & GYPSY

Songbird.. these letters weld wonderfully.

George

Warning: don't forget to choose don't save if you delete most the images off your mat to re-cut one of your images...or you will loose your file. 

Sorry!

The Bird Sings.....

Designed by Jeannie Phillips ~ Southside, AL

Click on any picture to enlarge.

Oh I was so excited about this card!!... I have been in a creative slump...and said to myself... "Jeannie no wonder you haven't prayed for a card!!".... I so said my prayer... then my "Thank you God for a card." to show my faith...and  this is what I got to make!!... its easier to see in person... there is a whole behind the birdcage... then a square of the same paper the birdcage is on... to the bird looks like he is inside the cage...not just behind it... I was so excited about this effect!!!... I hope that you like it too!!... I love your comments... they encourage me to create more!!...so thank you so much in advance for inspiring my spirit!... Hugs, Jeannie

CRICUT & GYPSY

Songbird

Large Decorative Square cut @ w 3.88 x h 3.24... on the Cricut I would cut this @ 3 1/4 inches.

Medium Decorative Square cut @ w 3.69 x h 3.0 inches ...on the Cricut I would cut this @ 3 inches.

Small Decorative Square ..the one with the square in it ... cut @ w 3.21 x h 2.86  this I rotated to make the taller side go vertically... on the Cricut I would cut this @ 2 3/4 inches.

Serenade

Birdcage and its layer cut @ w 1.53 x h 2.56...on the Cricut I would cut this @ 1 1/2 inches.

Birds and their wing layer cut @ h 0.75... set the height and the width will be right...on the Cricut I would cut this @ 3/4 an inch.

George

Large Square.. the one I used behind the bird cut @ w 1.67 x h 1.27 you will have to unlink the width and height to get this measurement... using the Cricut I would cut this at 1 3/4 inches by 1 1/4 inches on a paper trimmer.

Smaller Square .. the one that makes the hole in the decorative square.. do no weld this.... cut @ w 1.25 x h 0.95 inches.... using the Cricut I would lay your birdcage on the back of the decorative square cut and mark the square the bird in using the inside lines of the cage... then use an exacto knife to cut your square tiny bit larger thank you marks.

DAD You Take the Cake

Designed by Jeannie Phillips ~ Southside, AL

Click on any picture to enlarge.

My Dad's birthday is April 1st..and that will be here before I know it... so this is the card I came up for for him... I hope that he likes it!...thank you so much for looking!!

On another note... this morning my son's friend Matt met him him here for a 3 day hiking trip... and my son showed off one of my cards!!!... it made my day!!... say prayers for the hikers, there are 5 of them, over the next three days for me!... Hugs, Jeannie

CRICUT & GYPSY

George

Dad regular cut and shadow cut .. cut @ h 1.63 the same on all ...D's w 0.77, A w 1.07...on the Cricut I would cut these @ 1 1/2 inches.

"You Take The Cake"  cut @ h o.65...to get the width move the letter where the are over lapping in the words... with space between the words... then make sure they are grouped together... and welded...then set the width for the whole set of letters @ 4.61... on the Cricut I would cut these letters at 3/4 an inch.

Horizontal line is a tall rectangle turned sideways cut @ w 0.17 x h 4.55... using the Cricut I would cut this on a paper trimmer.

I welded the shadow of the "DAD" the "you take the cake" and the shadow of the cupcake to the horizontal line.

Celebrations

Cupcakes, the cupcake shadow and their layers cut @ h 2.18 set the height and the width will be right...on the Cricut I would cut the cupcake at 2 1/4 inches.

Congratulations and Good Luck!

Designed by Jeannie Phillips ~ Southside, AL

Click on any picture to enlarge.

This card was inspired by Anita Chavez's Friend card... click HERE to see hers... I just loved her layout!!... so this  morning I went to work to make my version of Anita's layout... and my daughter, Madison called and needed a Congratulations and Good Luck card... her boss got a promotion... at IP and they are going to miss her so much....so Madison wanted a special card for her... I added extra pages to the inside for people to sign... I so hope that Madison and her work buddies love the card... thank you so much for looking!!! Hugs, Jeannie

CRICUT & GYPSY

Walk in My Garden

Pot (x2) cut @ w 1.86 x h 1.50... I popped one off the other.... on the Cricut I would cut these at 1 1/2 inches.

Daffodil and its layers cut @ h 3.50...set the height and your width will be right on both cuts....on the Cricut I would cut this @ 3 1/2 inches.

Snail and its layer (x2) cut @ h 0.72 ..set the height and the width will be right....on the Cricut  I would cut this at 3/4 and inch.

Ladybug and her layer (x2) cut @ h 0.89 set the height and the width will be right.... on the Cricut I would cut these at 3/4 and inch.

Bee and its layers (x2) cut @ h 1.0  set the height and the width will be right..I cut two base layers  and two top layers for each bee the base layers I cut in velum so I would have two layers of wings...the top layers you need one in black and one in yellow... .on the Cricut I would cut these @ 1 inch.

Easter 2010

Grass

Tall Grass cut @ w w 1.92 x h 1.52...you will have to unlink the width and height to get this size....on the Cricut I would cut this @ 1 1/2 inches.

Shorter Grass Cut @ w 1.92 x h 1.32 ...on the Cricut I would cut this at 1 1/2 inches and trim 1/4 inch off the bottom with my paper trimmer.

George

Small Square cut @ w 1.45 x h 1.36...this will make a perfect square.

Medium Square cut @ w 1.61 x h 1.50.

Large square ...I decided I needed it later and cut it 1/4 inch taller and wider than the medium square on the paper trimmer...which was 1 3/4 inches by 1 3/4 inches.

Using the Cricut I would cut the large square 1 3/4 inches square ... medium square 1 1/2 inches square...and small square 1 1/4 inchs square...with my paper trimmer.

The words were computer generated..then I used my paper trimmer to make the frame and the strip behind the sentiment squares.