Oh Baby Card and Hats

Designed by Jeannie Phillips

I was in invited to a baby shower for a girl at my chruch... I was thinking oh what to buy... silly me I have been making caps like crazy.... so I decided this would be a fun gift!... I made the Christmas one for a photo prop.... I thought that would be so much fun with a December baby!!... I hope that she love the caps and the card.

Right now with the new update I am not sure how to share my card files... you get two options ... one is not save to your computer... when I figure it out I wll be glad to start sharing again!.

CRICUT & GYPSY

New Arrival

Baby cut @ w q.95 x h 2.39 ... on the Cricut I would cut these @ 2 1/2 inches.

Pooh and Friends

Hat (toboggan) cut @ w1.37 x h 1.65.. on the Cricut I would cut these @ 1.75.

Stamping

Oh Baby cut @ w 2.80 x h 1.37 ... on the Cricut I would cut this @ 1 1/4 inches.

Mini Monograms

Scalloped circles cut @ w 3.06 x h 3.39 & w 3.59 x h3.98... on the Cricut I would cut these @ 3 1/2 and 4 inches.

George

Circle cut @ w 2.63 x h 2.46 on the Cricut I think I would cut this @ 2 1/2 inches... that may be too big.. if it is I would leave the circle off... because the 2 1/4 inch circle is probably going to be too small.

Butterflies are a Martha Stewart Punch.

Be the Impossible Part 1 Card by Jeannie Phillips

Handmade by Jeannie Phillips - Southside, AL

Click on any picture to enlarge.

How to VIDEO on this card at bottom of this post.

Gypsy file available by email .. Just copy and paste this email into your own personal email account winacard@gmail.com

I needed a graduation card for a dear friend of mine Brittney… and NannaDonna from the Cricut Message board ask me to join her sketch challenge this week… sketch challenges are really hard for me .. So I was excited when I made this one work out… I so hope Donna is proud of this!!…thank you so so much for looking!!… I love your comments they mean the world to me… Hugs, Jeannie

CRICUT & GYPSY

Walk in My Garden

Flowers (I cut 2 per flower and layered them.. See video) cut @ w 1.11 x h 1.07 … I cut 16 of these total… on the Cricut I would cut these @ 1 ¼ inches.

Give a Hoot

Leaves cut @ w 1.09 x h .69 .. I didn’t use them all … on the Cricut I would cut these @ ¾ an inch.

Pooh and Friends

Bee and its layers cut @ w 1.51 x h 1.43...on the Cricut I would cut these at 1 ½ inches.

George

Tag cut @ w 2 10 x h 3.93.. You will have to unlink the width and height to get this size….using the Cricut I would hand cut this @ a tad bit larger than 2 inches wide and then I would cut it at 4 inches tall.

Circles for flower centers cut @ w o.36 x h 0.32.…on the Cricut I would cut these 1/4 and inch… I also put one of these circles in the tag to make the hole… Do not weld this to the tag just group.

Rectangle for pocket of card cut @ w 0.36 x h 1.39... You will have to unlink the width and height for this shape....using the Cricut I would cut this with my paper cutter 3 1/2 inches wide and just between 2 1/4 and 2 1/2 inches tall and use a hole punch for the whole in the tag.

Storybook

Flourish cut @ w 3.74 x h 1.39.. You will have to ungroup the width and height for this cut… I cut two of these…one I welded to the rectangle…..using the Cricut I would have to guess at this cut… I worked with it on my Gypsy and I think you can cut it at 1 inch and that will work.

Remembering God's Love - with Video

Designed by Jeannie Phillips ~ Southside AL

Click on any picture to enlarge.

Video instructions at the bottom of this post!

A link to Video instructions for God's Angel on the right side of my blog.

Gypsy File available by email …just copy and paste the email to your own email account winacard@gmail.com.

My husband took me to eat at Cracker Barrel yesterday and I say this beautiful card with a cross and flowers and hearts on it… I just love the feel of it so I came home to make me a version of it…. And when I finished laying out the cross, the heart and the flowers I knew this card needed an angel… God’s Little Angel…. And I imagined that the angel felt great joy when it laid his eyes on the cross… the card just filled my heart with joy!!… I hope it fills your heart too…this also ended up being a good first card to assemble on video because it is fairly easy… there is a separate video for the angel… it is just below this post or you will find a link to it on the right of my blog entitled Assembling God’s Little Angel…. I hope that my voice and my flow of instructions gets much smoother!!… I’m learning!!…. Thank you so much for looking… I love your comments!!… Hugs, Jeannie

CRICUT & GYPSY

Angel Cuts and Instructions

Pooh and Friends

Butterflies cut @ w 0.80 x h 0.88.. I welded a George rectangle cut @ w 0.20 x h 0.27 to the bottom of the butterfly….group them ...then duplicate...flip the second one from top to bottom and rotate it... move into place and group all of these together....you are going to trim off the tail and the nose and antennas and fold this in half...and glue it in between two of the angle cuts....on the Cricut I would cut 2 butterflies @ 1 inch.. glue the bodies together.. trim off the tail and the nose and antennas and glue that little part together... then glue this between two of the baby bodies.

New Arrival

Baby cut @ w 1.20 x h 1.42...on the Cricut I would cut this at 1 1/2 inches.

Paper Doll Dress Up

Angel's Hair is Raggedy Andy's hair cut @ w 1.29 x h 2.42...weld three of these onto the babies heads cut the fourth one in yellow..... on the Cricut I would cut this @ 1 inch...I think that will work... you can glue these to the baby's heads if using your Cricut.

Cross

George and Basic Shapes

The horizontal rectangles cut @ w 2.44 x h 0.77 … using the Cricut I would cut this with a paper trimmer… width just a bit bigger than ½ inch by h just shy of 2 ½ inches.

The vertical rectangles cut @ w 2.44 x h 3.42 … using the Cricut I would cut this with my paper trimmer… width just shy of 2 ½ inches and height just shy of 3 1.2 inches.

Hearts (from George) cut @ w 1.03 x h 0.81...on the Cricut I would cut these @ ¾ and inch.

Walk in My Garden

Tulips and its layers cut @ h 1.58 set the height and the width will be right…on the Cricut I would cut these @ 1 ½ inch.

So Don't Be Afraid, Little Flock

Designed by Jeannie Phillips - Southside, AL

Click on any picture to enlarge.

As many of you know I often pray for my cards...and I prayed for one last night...and this morning I was reading my daily Bible reading and this verse stood out (see inside of card below for the verse)!!.... I read this verse and thought "that is a card!!..I was so so excited... then I took a nap...and it all had come together in my head... I was so excited about it when I started ... and then even more excited when I finished!!... I hope that this card touches your heart, because it was truly a gift from God... Hugs, Jeannie

CRICUT & GYPSY

Pooh and Friends

Butterflies cut @ w 0.80 x h 0.88.. I welded a George rectangle cut @ w 0.20 x h 0.27 to the bottom of the butter fly..group them ...then duplicate...flip the second one from top to bottom and rotate it... move into place and group all of these together....you are going to trim off the tail and the nose and antennas and fold this in half...and glue it in between two of the angle cuts....on the Cricut I would cut 2 butterflies @ 1 inch.. glue the bodies together.. trim off the tail and the nose and antennas and glue that little part together... then glue this between two of the baby bodies.

New Arrival

Baby cut @ w 1.20 x h 1.42...on the Cricut I would cut this at 1 1/2 inches.

Paper Doll Dress Up

Angel's Hair is Raggedy Andy's hair cut @ w 1.29 x h 2.42...weld three of these onto the babies heads cut the fourth one in yellow..... on the Cricut I would cut this @ 1 inch...I think that will work... you can glue these to the baby's heads if using your Cricut.

Lamb cut ! w 2.35 x h 3.42...I cut two in white and one in black on the white ones I trimmed off the face and legs..on on the top white one I trimmed off the tail...I use the Swirls Cuttlebug Folder for the embossing... I put the white layer with the tail directly on the black cut...and popped the other layer from that...the sheep is also popped from the background...on the Cricut I would cut these @ 3 1/2 inches.

Easter 2010

Short Grass cut @ w 1.59 x h 1.09 x h there are four of these pieces to make a grass layer... I flipped two and welded and grouped them together to get the length I wanted.. which was 4.75 inches...

Tall Grass is the complete piece of short grass duplicated.. flipped side to side and change the height to....h 1.59...

 on the Cricut I would cut 4 for each row of grass.. and overlap them to create the grass..cutting one set a 1 inch and the other two sets @ 1 1/2 inches.

Walk in My Garden

Flowers (shadow blackout cut) cut @ w o.48 x h 0.39 ...I cut placed a total of 24 of these on the mat... twelve of them are welded to the grass to give a good place to glue the actual flowers and 12 I cut out in blue to match the flowers on my paper....on the Cricut I would cut these at 1/4 and inch and cut only 12 in the color of your choice and glue directly to the grass layers.

Ladybug and its layer cut @ 2 1.32 x h 0.89...on the Cricut I would cut this at 3/4 an inch.

Pooh's Pot

Designed by Jeannie Phillips ~ Southside, AL

Click on any picture to enlarge.

My brother, Jamie is in the hospital... please say a prayer for him...they are running test tomorrow... so I can home and dealt with my stress the best way I know how... I made a card... I guess you could say it is inspired by my love for my brother... hope you like... I was so excited at how it turned out!... thank you oh so much for looking...and I love love your comments!! Hugs, Jeannie

CRICUT & GYPSY

Pooh & Friends

Pooh and his layers cut @ h 1.78... if you set the height the width will be right on all cuts.... on the Cricut I would cut this @ 1 3/4 inches.

Tufts of Grass cut @ w 2.51 x h 1.21 inches.... on the Cricut I would cut these at 1 1/4 inches.

Walk in My Garden

Pots at top left of mat cut @ w 2.12 x h 1.72 inches....I cut two and popped one from the other..... on the Cricut I would cut these at 1 3/4 inches.

Shadow Pots on top right of mat cut @ w 1.92 x h 1.48 inches....these I used for the dirt from the pot that the flower is in...I cut the edges off the top of the pot..then used scissors to make a wavy edge on the "dirt"... I popped one from the other for the depth.... on the Cricut I would cut these @ 1 1/2 inches.

Bees and their layers cut @ h 0.79 ..set the height and the width will be right...I cut two of the base for each bee out of velum for the wings...then I cut a layer in black and one in yellow....on the Cricut I would cut these at 3/4 and inch.

Flower Stem cut @ w 0.84 x h 2.35 inches... on the Cricut I would cut these at 2 1/4 inches.

Flowers and its center layer cut @ h 1.19 inches... I glued the two flower cuts together with the stem in-between the layers.... on the Cricut I would cut these at 1 1/4 inches.

Layers of dirt at the bottom cut with a wavy cutter and embossed with the Cuttlebug Swirls folder.

Mischievous Bunnies

Designed by Jeannie Phillips - Southside, AL

Click on any picture to enlarge.

I was blog hopping the other day...and ran across a card with a stamped image that inspired this card!...I loved it so much that I just couldn't get it off my mind until I made it!!... Hope that you like it!!... it was just too fun to pass up!!... thank you so much for looking and for your comments they mean so so so much to me!... have a wonderful day... Hugs, Jeannie

CRICUT & GYPYSY

Pooh and Friends

Tufts of grass cut @ w 2.04 x h 1.02...on the Cricut I would cut these @ 1 inch.

Walk in My Garden

Garden Tools cut @ w 2.23 x h 1.93... I cut one set in brown and one set in grey...trimmed off the handles of the brown tools and adhered to the grey tools.......on the Cricut I would cut these @ 1 3/4 inches.

Clay Pots cut @ w 1.51 x h 1.22.. there is a clay pot popped from the background paper and then one popped from that.....on the Cricut I would cute these @ 1 1/4 inches.

Everyday Paper Dolls

Small Rabbits cut @ 2 1.20 x h 2.21...I cut the heads from the second cuts for the two bunnies on the ends and popped the heads from the bodies..... on the Cricut I would cut these @ 2 1/4 inches.

Larger bunnies cut @ w 1.42 x h 2.61... this is for the middle bunny...and the bunny on the inside of the card... It needs to be larger for the bottom to look right sticking out of the pot.... cut the head from the body..sick the bottom up in the air... and then the head covering the cut part...but down in the pot...see card...on the Cricut I would cut these bunnies @ 2 1/2 inches.

Love You ~ Altered Picture Frame

Designed by Jeannie Phillips ~ Southside, AL

Click on any picture to enlarge.

Over at The Gypsy Spot we were to make altered picture frames... I could not imagine what I would do... after all I am a card maker.... what on earth was I going to come up with...then I thought... "oh I could make a "frame card."... then it was easy!!... and when I discovered this beautiful paper I knew exactly what I was going to do!!... I hope that you like it... be sure and visit the other Altered Picture Frames this week over at The Gypsy Spot... this will be its last week... Nilda has decided to give up this wonderful blog... we are going to miss her...and The Gypsy Spot!

CRICUT & GYPSY

George

Large Square cut @ w 8.0  x h 6.50 on real dial size and unlinked ...on the Cricut I would use a paper trimmer to cut this.

Small Square cut @ w 5.62  x h 3.50 on real dial size and unlinked ... on the Cricut I would cut this with an Exacto knife.

I cut these the sizes of the frame...one the size of the outside of the frame... the second one the size of the inside of the frame...don't weld so you will have a hole in the frame.

Doodle Charms

Sun cut @ w 4.22 x h 3.42... I cut two of these... on the Cricut I would cut this at 3 1/2 inches.

Pooh & Friends

Tufts of Grass cut @ w 1.96 x h 0.94 inches... on the Cricut I would cut these @ 1 inch.

Learning Curve

"ewe" cut @ h 2.69.. then I grouped them together...and made the total width of 4.49....on the Cricut I would cut these @ 2 1.2 inches.

Opposites Attract

"love" and its shadow cut @ w 4.49 x h 2.68....I welded the shadow to the "ewe"... on the Cricut I would cut this @ 2 1/2 inches...and glue the "love" shadow over the "ewe."

Animal Kingdom

Lamb and its layers cut @ w 2.85 x h 3.03... on the Cricut I would cut these at 3 inches.

Lamb Head cut @ w 1.89 x h 1.49.... if I were using the Cricut I would cut an extra lamb and cut the head from the body.

I did lots of popping... I popped the first lamb body in black from the background...then the second lamb with the white body piece adhered to it from the first black lamb piece... then I popped the white embossed lamb body from that...and popped the head from that and double popped the white tuft of hair from that.

The layers of waves for the grass were cut with a wave cutter... and each piece popped from the other with one piece glued inside the frame.

Snail Mail... Got my new Paisley cart...so excited.

Designed by Jeannie Phillips ~ Southside, AL

Click on any picture to enlarge.

I got my new Paisley card in the Mail on Monday...was busy all day!!...then at the doctor yesterday I laid out this card.... and today I found some wonderful scraps... and I am so excited at how this turned out!!... I hope that you like it too... the layers are a little tricky..but once you figure them out..they make such cute creatures!!... thank you so much for looking... Hugs, Jeannie

CRICUT & GYPSY

Paisley

Snail and all its layers cut @ h 1.88 inches... set the height and the all the widths will be right.

The layers include the black full snail, the full snail with the eyes cut out, the snail shell, the sun, the sun center, and the cheeks.... on the Cricut I would cut these at 1 3/4 inches.

Walk in My Garden

Ladybug and its layer cut @ h 0.89 inches... the width will be right with this height....on the Cricut I would cut this at 3/7 and inch.

Pooh and Friends

Clouds cut @ w 3.60 x h 2.06...I flipped the second one..and overlapped the small clouds and welded to save paper...On the Cricut I would cut these @ 2 1/4 inches.  

Doodlecharms

Envelope cut @ w 1.12 x h 0.70 inches... on the Cricut I would cut this at 3/4 and inch.

George

Tiny Heart for envelope cut @ w 0.34 x h 0.27 inches... on the Cricut I would cut this at 1/4 and inch.

Zooballoos

Grass cut @ w 3.38 x h 1.53 inches... 4 times...I welded two of the grasses together to get the total link I wanted... this cut is on layer and shift on the bottom row of Zooballoos... on the Cricut I would cut these on real dial size at 3/4 and inch 4 times and overlap to get the length you need.

Gypsy Font

"Snail Mail" cut @ h 0.91 inches..set the height and the width will be right on all the letters... I welded the letter together on "snail"...and then on "mail."...on the Cricut I would cut this @ either 3/4 an inch or 1 inch.

Birthday Clown

Designed by Jeannie Phillips - Southside, AL

Click on any picture to enlarge.

I am excited about this card...it's one I am using Monday for my card class... it was inspired by Kim Romig's clown card which was inspired by my elf card....thank you for inspiring me Kim!... I hope that you like it...and I hope that my class likes it!!

CRICUT & GYPSY

Some of your cuts need to be on a separate page but I put them all together so your could see them in one picture... see screen shot in the last picture.

Pooh & Friends

Hair... they are clouds... cut @ w 1.89 x h 1.58..the second one is duplicated and flipped sideways...on the Cricut I would cute these @ 11/2 inches.

Stamping

Happy Birthday cut @ h 1.71 inches...both the shadow and the regular cut... on the Cricut I would cut this @ 1 3/4 inches.

Paper Doll Dress Up

Hats cut @ h 4.05... the width will be right if you set the height...I welded a hat to each of the heads...on the Cricut I would cut these at 1 1/2 inches.

Celebrations

Balloons cut @ h 4.02 ... 2 regular cut balloons and 1 shadow cut balloon which I welded to the card square ...on the Cricut I would cut these @ 4 1/4 inches.

George

Rectangle is a square cut @ w 3.50 x h 4.75 on real dial size... using the Cricut I would cut this with a paper trimmer.

Ovals for the faces cut @ w 2.48 x h 4.05 ...on the Cricut I would cut these at 4 inches.

Ears are hearts cut @ w1.21 x h 0.95 welded to one of the ovals... I put these on the back ovals so the ears would appear behind the face... on the Cricut I would cut these at 1 inch.

Ovals for eyes cut @ w.0.51 x h 0.69...on the Cricut I would cut these at 3/4 an inch or 1/2 inch.

Circles cut @ w 0.41 x h 0.38...ob the Cricut I would cut these at 1/4 an inch.

Circles for nose cut @ w 0.62 x h 0.58.I cut two of these pop dotted the top one...on the Cricut I would cut these at 1/2 inches.

Circle for center of bow..which is popped from the bow cut @ 0.56 x h 0.53...on the Cricut I would cut this at 1/2 inch.

Mickey and Friends

Bow which is for Minnie's hair cut @ w1.38 x h 1.60 ... on the Cricut I would cut this at 1 1/2 inches.

Christmas Elf

Designed by Jeannie Phillips - Southside, AL
Click on any picture to enlarge. Southside, Al

I was at Wanda's the other day...she had instructions on how to make this adorable little elf with punches from Stampin-Up... they were just adorable... but you know me... I am a Cricut person through and through!!..so I had to get out my Gypsy and make one on the same principal but with my Cricut cartridges... I was excited with how it turned out... if I make it again I will weld the collar piece to the "card" card piece so it will stand up right... I hope you like it... thank you so much for looking.   Hugs and Merry Christmas, Jeannie

CRICUT  & GYPSY

Storybook

Bookplate Shapes cut @ w2.80 x h 4.o ...On the Cricut I would cut this at 4 inches.

I also cut an extra bookplate shape for the inside of the card...this is cut @ w 2.43 x h 3.47 ...on the Cricut I would cut this piece at 3 3/4 inches.

Pooh &Friends

Santa Hat and its layers cut @  h 3.o the width will be right if you set the height...on the Cricut I would cut this @ 3 inches (I think).

Paper Doll Dress Up

Hair cut @ w 3.27 x h 4.54... you will have to unlink the width and height to get the size.... On the Cricut I am not sure what to cut this at because I stretched it both way on my Gypsy.

George

Triangles for collar cut @ w 2.32 x h 0.81..I again unlinked the width and height to get this shape and welded the shapes together... using the Cricut you could use 2 ovals for the collar.

Ovals for eyes cut @ w 0.59 x h 1.11 I cut the skin colored one in half...on the Cricut I would cut these @ 1 inch or maybe 1 1/4 inches.

Circles for eyes (which look like diamonds in the picture) cut @ w o.54 x h 0.51... on the Cricut I would cute these at 1/2 inch.

Circle for nose cut @ w ).49 x h 0.45 ... on the Cricut I would cut this @ 3/4 and inch.

Hearts for ears cut @ w 1.66 x h 1.30 and welded to the Bookplate shape ... on the Cricut I would cut the hearts @ 1 1/4 inch you will just need one cut in half and glued from the back.

For the card shape I welded the hearts to the book plate cut then grouped and duplicated this and flipped the duplicated piece up and placed it just overlapping to make the card.

If using the Cricut I would cut an extra bookplate and score it 1/2 inch from the top..and only adhear it above the score line to make a card.

All images in red are welded.

Little Bird of Hope

This card had to be special...and was such a labor of love!!... a friend of mine at work, Brittney her mom just found out she has Breast Cancer.... he mom is 54 I think...she need our prayers!!... Brittney wanted a special card for her mom and her mom loves birdhouses .... this is what I came up with...been working on it all morning I hope that she likes it... Please keep B's mom in your prayers!... thanks for looking... !

Hugs
Jeannie

CRICUT

Stretch Your Imagination

Birdhouse cut @ 5 1/2 inches on the stretch feature.

I cut it three times on regular cut once on layer to pop it from the page.

Pooh & Friends

Branch cut @ 7 inches and 6 inches on the layer feature.

Paper Doll Dress Up

Vine cut @ 1 3/4 inches 2 times and one time 2 1/4 inches.

It is on the paper doll wedding page.

Happily Ever After

Bird cut @ 1 1/2 inches using both cuts.

Stand and Salute

Pink ribbons cut @ 1 inch and 1 1/2 inch...on regular and layer cut.