Wagon of Presents

Designed by Jeannie Phillips ~ Southside, AL

Click on any picture to enlarge.

I am so excited about this card!!!...it's just a fun card.... it was inspired by Larkspur on the Cricut Card Message Boards.... I just loved her Wagon of Thanks card ... then there was this puppy on the Everyday Paper Dolls cartridge that I have been wanting go use...it just screamed cut me apart and layer me up...so when I saw Larkspur's Wagon card I knew exactly what I was going to make!!.... I hope that you like it too!!... I was just too too excited!!... Always thanking God for giving me card ideas, I ask him daily for new cards to make! .... Thank you so much for looking!!... Hugs, Jeannie

CRICUT & GYPSY

Every Day Paper Dolls

Puppy cut @ w 1.62 x h 1.93 cut 3 times... I cut the face from one, the front feet,body and face from the middle cut...and kept the whole piece for the back cut.... on the Cricut I would cut these @ 2 inches.

Paper Doll Dress Up

Wagon cut @ w 4.40 x h 6.80.. it will not cut out that tall!... I cut this three times..once in black and twice in red...I cut the wagon only from the red pieces... adhered the first red wagon directly on top of the black cut...and popped the second red wagon from the first... on the Cricut I would cut these at 2 1/2 inches on real dial size.

Walk in My Garden

Tulips and its layer cut @ h 1.83...the width will be right if you set the height... on the Cricut I would cut these @ 1 3/4 inches.

Clay Pot cut @w 1.11 x h 0.90...I used two on the outside and two on the inside...popping the top one on the outside...and sandwiching the flowers between the two on the inside... on the Cricut I would cut these @ 1 inch.

Zoobaloos

Grass cut @ w 4.75 x h 1.34... I overlapped two of these making them the size of my background piece and welded them together...then duplicated this to have two layers of grass...on the Cricut I would cut these at 1 1/4 inch on real dial size... 4 times..the overlap for the same effect.

The grass cut is on shift and layer feature.

Love for Valentines

Designed by Jeannie Phillips ~ Southside, AL

Click on any picture to enlarge.

I was a bit fidgety watching TV last night so I got our my Gypsy to go through my cartridges....and see if I could come up with any ideas...I just got the new Sentimental cartridge the other day and I love, love the stamp cut on it... and had Valentines on my mind and looked at the Sweethearts cartridge, which I haven't used very much.... and decided laid this card out really quick without thinking much of it... when I decided on the papers I wanted to use today I got really excited!!!... its a simple card...but the papers and the Ultra Fine Clear Embossing Powder on the balloons, the "love", and the couple really set this card off.... I am really really happy with how it turned out!!... hope that you like it too!!...I prayed to God for some card ideas...I told him I really needed this for my mental health....and he has been so good to me the last couple of day...always...but the last couple of days with my cards.... So I want to give God the credit for these cards and say "Thank you God so much for what you do for me!".... thank you so much for looking!... Hugs, Jeannie

CRICUT & GYPSY

Sentimental

Large Stamp frame cut @ w 4.19 x h 5.25 ...on the Cricut I would cut this @ 5 1/4 inches.

Small Stamp frame cut @ w 2.81 x h 3.33 ... on the Cricut I would cut these at 3 1/4 inches.

Large Stamp center cut w 4.78 x h 3.29 ...using the Cricut I would cut this with my paper cutter.

Small Stamp center cut @ w 2.27 x h 3.34...using the Cricut I would cut this with my paper cutter.

 Sweetheart

Couple with balloons cut @ w 2.77 x h 2.84 ...on the Cricut I would cut them @ 2 3/4 inches.

Extra Balloons cut @ w 0.94 x h 0.74 there are only 3 on the mat but I cut 4..one for the inside...on the Cricut I would cut these the same as the couple on the layer feature... but I an not sure at all on this cut... you might just want to cut the couple again in red and use just the balloons to pop on top of the other balloons.

Beyond Birthdays

"love" cut @ w 3.24 x h 1.14... on the Cricut I would cut this at 1 1/4 inches.

Snail Mail... Got my new Paisley cart...so excited.

Designed by Jeannie Phillips ~ Southside, AL

Click on any picture to enlarge.

I got my new Paisley card in the Mail on Monday...was busy all day!!...then at the doctor yesterday I laid out this card.... and today I found some wonderful scraps... and I am so excited at how this turned out!!... I hope that you like it too... the layers are a little tricky..but once you figure them out..they make such cute creatures!!... thank you so much for looking... Hugs, Jeannie

CRICUT & GYPSY

Paisley

Snail and all its layers cut @ h 1.88 inches... set the height and the all the widths will be right.

The layers include the black full snail, the full snail with the eyes cut out, the snail shell, the sun, the sun center, and the cheeks.... on the Cricut I would cut these at 1 3/4 inches.

Walk in My Garden

Ladybug and its layer cut @ h 0.89 inches... the width will be right with this height....on the Cricut I would cut this at 3/7 and inch.

Pooh and Friends

Clouds cut @ w 3.60 x h 2.06...I flipped the second one..and overlapped the small clouds and welded to save paper...On the Cricut I would cut these @ 2 1/4 inches.  

Doodlecharms

Envelope cut @ w 1.12 x h 0.70 inches... on the Cricut I would cut this at 3/4 and inch.

George

Tiny Heart for envelope cut @ w 0.34 x h 0.27 inches... on the Cricut I would cut this at 1/4 and inch.

Zooballoos

Grass cut @ w 3.38 x h 1.53 inches... 4 times...I welded two of the grasses together to get the total link I wanted... this cut is on layer and shift on the bottom row of Zooballoos... on the Cricut I would cut these on real dial size at 3/4 and inch 4 times and overlap to get the length you need.

Gypsy Font

"Snail Mail" cut @ h 0.91 inches..set the height and the width will be right on all the letters... I welded the letter together on "snail"...and then on "mail."...on the Cricut I would cut this @ either 3/4 an inch or 1 inch.

New Shoes ~ Cheap Therapy

Designed by Jeannie Phillips - Southside, Al

Click on any picture to enlarge.

This card is for my card class....I am so so enjoying this class...it is just too much fun.... I have the sweetest group of ladies that are there and they just make my week.... they are learning lots... now that they all have Gypsies we put the card we make that week on their Gypsy so they can go home and repeat the card if they want.... I can't wait until one of them calls me and says "I cut out my card!!"... I will just be too excited... Since not everybody has the same carts I am making something from the Gypsy Wanderings and Gypsy Font cartridges for a few weeks while they are getting the hang of things so they CAN go home and use their Gypsy... this is the card I came up with for this week...when I saw the shoe cut out in the oval scallop this card just popped right into my head... I got to use a new technique I learned too from Christmas With The Cricut... on a cut out...like with the shoe...you just take clear packing tape... stick to the back over the cutout...turn it over and sprinkle glitter on the cutout...and it stick to the tape....so quick and easy...and so effective!!... Thank you so much for looking!!... A special thank you to my card class ladies!!... Hugs, Jeannie

CRICUT & GYPSY

Gypsy Wanderings

Oval with shoe cut @ 2.75 x 1.84.

Ovals under the shoe cut cut @ w 3. 0 x h 1.89, w 3.25 x h 2.05 and w 3.50 x h 2.21.

Book Plates  cut @ small (2) - w 2.44 x h 1.16 and large w 2.93 x h 1.40.

On these cuts I unlinked the witdth and the height so get the sizes I wanted.

Swirley (2)  cut @ w 0.73 x h 1.55...then use the rotate button to turn design.

Gypsy Font

"New" cut @ h 0.61...the witdths will be right on all the letters if you set the height @ 0.61.

"Shoes" cut @ h 0.87 the width will be right on all the letter if you set the height @ 0.87.

The letters to "New" and the letters to "Shoes" are welded together...except for the S.

Thinking of You

Designed by Jeannie Phillips- Southside, AL

Click on any picture to enlarge.

In the card class I teach all the ladies got Gypsies for Christmas...so since they all have Gypsy Wanderings I made a card with that cartridge so we could put it on all their Gypsies and they could get a use to navigating around their Gypsy... this is a pretty simple card... it does have a little welding... I hope that they like it!!... I hope that you like it!!...Hugs, Jeannie

CRICUT & GYPSY

Gypsy Wanderings

Grass cut @ w 2.05 x h 0.54  I used two of these and welded them together to get the width I wanted for the card... I also cut one @ w 2.05 x h 0.73 and did it the same way...but on this one after it was welded together...and grouped I flipped it sideways.. it made the grass look better when it was layered.

Tree trunk  cut @ w 3.o x h 5.27

Tree (greenery) cut @ w 3.34 x h 5.27

Bookplate lg cut @ w 3.84 x h 1.85

Bookplate sm cut @ w3.34 x h 1.65

"Thinking of You" cut @ w2.28 x h 1.04

Doves cut @ w 1.47 x h 0.69

On all the cuts but the you will need to unlink the width and heigth to get these sizes.

Graduation - The Gypsy Spot Design Team Card

Designed by Jeannie Phillips - Southside, AL

Click on any picture to enlarge.

This is my The Gypsy Spot Design Team card for this week.... our mission was to use black and gold... the paper I chose for this project dictated its simplicity... I was really happy with how it turned out... it is for a young man that I use to work with... a very sweet, good, kind young man that I just love to death... so it needed to be masculine... and those are hard to do!!... hope that you like it!!...I hope that he does too.

Be sure and check out The Gypsy Spot and see the wonderful things the other design team members have come up with!!  Thanks for looking... Hugs Jeannie

GYPSY HINT

When you are stacking shapes like I did in this card, behind the graduation cap, get the shape you want... make it the size you want for the largest piece... then duplicate that shape... click the button that makes, a shape smaller, 2 times... repeat this process for each piece until you have as many stacks as you want.

This will give you perfect intervals between shapes.

CRICUT & GYPSY

George

Squares cut @ sm. w 2.64 x h 2.46, md. w 3.06 x w 2.86 and lg. w 3.33 x 3.11 ...on the Cricut I would cut these at 2 1/2. 2 3/4 and 3 inches.

Locker Talk

Caps and the tassel layer cut @ w 3.15 x h 2.0...I cut two ..on the top layer I trimmed the bottom part of the cap off..and popped the square part from that piece...I trimmed the tassel  from the piece with the bottom left on... on the Cricut I would cut these at 2 inches.

Smaller Cap on inside of card  cut @ w 2.15 x h 1.37 I used a gold gel pen for the tassel  ... on the Cricut I would cut this @ 1 1/4 inches.

Wild Card

"Congratulations" cut @ w 3.12 x h 5.14... on the Cricut I would cut this @ 1 1/4 inches on real dial size.

The Spa Treatment

Designed by Jeannie Phillips - Southside, AL

Click on any picture to enlarge.

This card was inspired by the children's book illustrator Caroline Jayne Church.... I love her artwork so much that my future daughter-in-law Robin got one of her books for me for Christmas.... her artwork is so inspiring!!!...I even sent her an e-mail telling her her sketches would make wonderful stamps!!!!.... I hope she hears me!!... I hope that you like this card...I was beyond excited when I got finished!!.. thank you so much for looking! ~~ Hugs, Jeannie

CRICUT & GYPSY

New Arrival

Bathtubs cut @ w 3.56 x h 3.57... I trimmed the legs and shower pipe off  of the second tub..this I pop dotted on top of the first tub and then I trimmed the rim off the third tub which is popped off the second tub...On the Cricut I would cut this @ 3 1/2 inches.

Ducks cut @ w 0.85 x h 0.86...I ended up not using the layer cut...I just used an orange Sharpie to color the beak .... on the Cricut I would cut these 2 3/4 an inch.

Paper Pups

Dogs cut @ w 1.94 x h 2.68...I popped the second one from the first one... on the Cricut I would cut this at 2 3/4 inches.

Everyday Paper Dolls

Water Splashes cut @ w 1.04 x h 4.16..and skewed them 0.06 degrees...I did one..then duplicated and flipped side to side... on the Cricut I would cut these @ 1 1/4 inches on real dial size!

A Child's Year

Tear Drops cut @ w 0.22 x h 0.47..on the Cricut I would cut these @ 1/2 inch....maybe even 1/4 inch.

A FarmVille Valentine

Designed by Jeannie Phillips - Southside, AL

Click on any picture to enlarge.

I was so excited when I thought of this card.... I just love FarmVille!!....it has been so much fun... so this is what I came up with... Hope that you like it... it made me happy!... Hugs, Jeannie

CRICUT & GYPSY

Animal Kingdom

Cow cut @ w 2.07 x h 1.95 I cut two of these and popped the top one...on the Cricut I would cut this at 2 inches.

Cow face and its layer cut @ w 1.21 x h 1.0 I cut two of these and popped the top one. (you have to trim the ear and hair tuft off the cow to add the head) ... on the Cricut I would cut this at 1 inch.

My Community

Tree and its trunk layer cut @ h 3.32... set the height and the width will be right...on the Cricut I would cut this @ 3 1.4 inch.

Paper Doll Dress Up

Fence cut @ w 3.31 x h 1.0  I used 2 and welded them together overlapped to make them the right length... then duplicated  it for the second fence...the front fence is popped dotted from the page... on the Cricut I would cut this at 1 inch... I would cut 4 and overlap the cuts to make the fence the right length.

Zoobaloos

Grass (short) cut @ w 4.77 x h 1.24 its on the layer feature with shift .... on the Cricut I would cut this on real dial size @ 3/4 and inch, to make it wide enough.

Grass (tall) cut @ w 4.77 x h 1.84 ...on the Cricut I would cut this on real dial size at 1 inch.g

George

Cows Hearts...(I used these to make his spots) cut @ h 0.39 (x2) and  h 0.33 (x1)...on the Cricut  I would cut these at 1/4 inch for all 3.

Red Hearts  (using the shift button) cut @ w 0.49 x h 0.50 (x 10) ...on the Cricut I would cut these at 1/2 and inch.  

Slow Basket of Love

Designed by Jeannie Phillips - Southside, Al

Click on any picture to enlarge.

I have to thank TerriBerri for this card... she made the cutest snail card ever with presents on it.... and this is how I ended up with this turtle card.... My son's girlfriend, Robin loves turtles... so this is her Valentine's card.... I sure hope that she likes it!!... thank you so so much for looking... hugs, Jeannie

CRICUT & GYPSY

Doodle Charms

Sun  cut @ w 0.43 x h 2.29 I cut two of these...forgot to save again on my Gypsy so it isn't on the screen shot... on the Cricut I would cut these @  2 1/4 inches.

Baskets cut @ w 1.32 x h 1.29... I cut 5 of these...two were welded to the turtle shells... 1 for the inside... one to pop from the one that is glued directly to the top turtle shell... on the Cricut I would cut these at 1 1/4 inches.

Going Places

Cloud (small) cut @ w 1.97 x h 1.0... on the Cricut I would cut this @ 1 inch.

Cloud (large) cut @ w 2.40 x h 1.21... on the Cricut I would cut this @ 1 1/4 inch.

Walk in My Garden

Turtle and its shells cut @ w 3.45 x h 1.83 with the link button off...on the Cricut I would cut this at 2 inches... but on the Gypsy I did change the shape some.

Zoobaloos

Grass (short) cut at w 4.69 x h 0.93 with the link button off and on real dial size its the layer feature with shift on....on the Cricut I would cut this twice @ 1 inch on real dial size... you will need to cut it twice and trim the extra.

Grass (tall) cut at w 4.73 x w 1.19 x h 0.93 with the link button off and on real dial size its the layer feature with shift on....on the Cricut I would cut this twice @ 1 inch on real dial size... you will need to cut it twice and trim the extra.

Your love makes my heart feel like spring.

Designed by Jeannie Phillips - Southside, Al

Click on any picture to enlarge.

I just got so excited when this card turned out like it did... better than in my head... I have to give Donna M lots of credit... her Butterfly Heart shaped card inspired me... I had gotten this cart and was not sure I liked it...then Donna posted her card and I saw the shapes in a whole new light... I hope that you like it too!... Hugs, Jeannie

CRICUT & GYPSY

Love Struck

Hearts cut @ w 4.0 x h 3.54..both the shadows and the regular cut... on the Cricut I would cut these @ 3 1/2 inches.

Gypsy Wanderings

Keys cut @ w 1.32 x h 3.21...I cut three of these and glued them together to make the key thicker...on the Cricut I would cut these @ 3 1/4 inch.

Walk in My Garden

Flowers cut @w 0.71 x h 0.68 and 0.53 x h 0.51...these flowers didn't match the ones on the heart exactly but they worked! ...on the Cricut I would cut these at 1/4 and 1/2 inches.
George
Rectangles cut @ w 1.39 x h 2.86 and w 1.09 x h 2.54...using the Cricut I would cut these on a paper trimmer.