Thank Your For Stopping By

Thank you so much for stopping by to visit my blog... it is changing as I change and learn more things... I hope after Christmas to get an opportunity to make some more CARDS. I am loving Loom Knitting now... and have lots to do before Christmas....I don't mind sharing how I do things and if you have questions you can E-MAIL me @ winacard@gmail.com and I will be happy to answer any questions that I have.


Tuesday, December 29, 2009

Mom In Hospital Again

Please keep her and us in your prayers.

Dad went to the doctor for an after surgery checkup... he is doing great!!!.... God is good.

Hugs
Jeannie

Tuesday, December 22, 2009

Christmas Elf

Designed by Jeannie Phillips - Southside, AL
Click on any picture to enlarge. Southside, Al


I was at Wanda's the other day...she had instructions on how to make this adorable little elf with punches from Stampin-Up... they were just adorable... but you know me... I am a Cricut person through and through!!..so I had to get out my Gypsy and make one on the same principal but with my Cricut cartridges... I was excited with how it turned out... if I make it again I will weld the collar piece to the "card" card piece so it will stand up right... I hope you like it... thank you so much for looking.   Hugs and Merry Christmas, Jeannie

CRICUT  & GYPSY
Storybook
Bookplate Shapes cut @ w2.80 x h 4.o ...On the Cricut I would cut this at 4 inches.
I also cut an extra bookplate shape for the inside of the card...this is cut @ w 2.43 x h 3.47 ...on the Cricut I would cut this piece at 3 3/4 inches.
Pooh &Friends
Santa Hat and its layers cut @  h 3.o the width will be right if you set the height...on the Cricut I would cut this @ 3 inches (I think).
Paper Doll Dress Up
Hair cut @ w 3.27 x h 4.54... you will have to unlink the width and height to get the size.... On the Cricut I am not sure what to cut this at because I stretched it both way on my Gypsy.
George
Triangles for collar cut @ w 2.32 x h 0.81..I again unlinked the width and height to get this shape and welded the shapes together... using the Cricut you could use 2 ovals for the collar.
Ovals for eyes cut @ w 0.59 x h 1.11 I cut the skin colored one in half...on the Cricut I would cut these @ 1 inch or maybe 1 1/4 inches.
Circles for eyes (which look like diamonds in the picture) cut @ w o.54 x h 0.51... on the Cricut I would cute these at 1/2 inch.
Circle for nose cut @ w ).49 x h 0.45 ... on the Cricut I would cut this @ 3/4 and inch.
Hearts for ears cut @ w 1.66 x h 1.30 and welded to the Bookplate shape ... on the Cricut I would cut the hearts @ 1 1/4 inch you will just need one cut in half and glued from the back.
For the card shape I welded the hearts to the book plate cut then grouped and duplicated this and flipped the duplicated piece up and placed it just overlapping to make the card.
If using the Cricut I would cut an extra bookplate and score it 1/2 inch from the top..and only adhear it above the score line to make a card.



All images in red are welded.


Monday, December 21, 2009

Thanks



My dear friend, Wanda called today...asked me to design her a thank you card.... I wanted it to be special because she is so very special... keep her in your prayers she is very sick and needs your prayers... this is the card I came up with... I hope that she likes it.... I am going to have to run to Hobby Lobby and make sure I can find her these papers... if I can't its back to the Gypsy drawing board to design another... thank you so much for looking!!... and remember to keep Wanda in your prayers.  Hugs, Jeannie
CRICUT & GYPSY
Walk in My Garden
Vases cut @ w 1.19 x h 2.27 on the Cricut I would cut these @ 2 1/4 inches.
I cut 2 vases and popped one from the other...the bottom vase is popped from the background paper.
Stretch Your Imagination
Leaf Spray (behind the rose) cut @ w1.19 x h 2.27 on the Cricut I would cut these @ 2 1/4 inches.
I trimmed off the bottom leafs to make these fit right in the vase.
Wild Card
Rose cut @ w 2.71 x h 3.80 on the Cricut I would cut these @ 3 3/4 inches.
I cut one of these in red and one in green...trimmed the red rose off the red one and popped off the green cut.
Opposites Attract
"Thanks" cut @ w 3.88 x h 1.04.
"Thanks" Shadow cut @ w 3.85 x h 1.03.
You will have to unlink the width and height to get this cut... but do not use real dial size.
On the Cricut I would cut this on upright at 1 inch.
The background pieces of paper are cut at 5.25 x 4 then 4.75 x 3.5 and 4.25 x 3.
I used a corner punch I have to punch the corners... I popped the top piece from the piece  below it and the second peice from the piece below it.









Friday, December 18, 2009

Just a Little News

Goodmorning...and Merry Christmas... its been a busy week at my house ... as many of you know  on Monday I found out my mom only has 2 to 3 years she has COPD really bad...and my dad (not married to my mom) had surgery on his back/neck on Tuesday... he did wonderfully!! ....and we start Christmas this weekend..and even though I was ahead I got behind and have been rushing, rushing, rushing... Hopefully next week I will get to make a card or two...don't give up on me!!!... keep us in your prayers.
Hugs  and Love and Merry Christmas!
Jeannie

Monday, December 14, 2009

Noel (Shaped Card) for The Gypsy Spot

Designed by Jeannie Phillips - Southside, AL
Click on any picture to enlarge.

Over at The Gypsy Spot this week we were to design a Christmas Card... this was in my head a couple of days and I was really excited when it turned out right "in" paper.... I must admit it did take me some time to get everything in all the layers lined up just right...but the effort was worth it.... I used the page feature on this card to line everything up just right...to get the photos of each page all I had to do was use the "eye" feature on the Gypsy that shows how the page is going to cut...although the inside "looks" really simple... it was a little complicated when I was creating it so I am extra proud of the inside... Be sure and hop on over to The Gypsy Spot and see what the other Design Team members have created this week... I am just so excited!... Thank you so much for looking!... Merry Christmas Everybody!!... Hugs, Jeannie

CRICUT & GYPSY
Because of all the welding I will not be including Cricut cuts for this card.
The NOEL Sizes
Page 1
Plantin Schoolbook
"n" cut @ w 2.99 x h 5.96 its shadow is cut @ w 3.21 x h 5.96.
I used a lower case letter for the "n" and stretched it tall so you will have to unlink the w x h of this letter to get the right shape.
Learning Curve
"o" cut @ h 3.95 set this height on the regular cut and the regular cut and the width will be right on both cuts.
"e" cut @ h 3.95 set the height on shadow and the regular cut and the width will be right on both cuts.
Christmas Cheer
"L"
"L" is the Candy Cane cut cut this at h 3.60 set the height on the regular, shadow and layer cuts and the width will be right on all cuts.
Card Base Sizes
Page 2
George
Square cut @ w 3.18 x h 3.80 on real dial size and unlinked at the w & h buttons.
1st Circle cut @ w 3.05 x h 3.25 on real dial size and unlinked at the w & h buttons.
2nd Circle cut @ w 2.75 x h 2.75 on real dial size and unlinked at the w & h buttons.
Rectangle is a square cut @ w 1.96 x h 4.12 on real dials size and unlinked at the w&h buttons.
I did the bottom layer first grouped and welded (see picture of screen cuts) then I duplicated this piece and flipped up the duplicated piece and placed it on top of the first piece.
Inside of Card
Page 3
 Sentiment Piece
George
Square cut @ w 2.55  x h 2.91 on real dial size and unlinked at the w & h buttons.
1st Circle cut @ w 2.43 x h 2.60 on real dial size and unlinked at the w & h buttons.
2nd Circle cut @ w 2.23 x h 2.30 on real dial size and unlinked at the w & h buttons.
Rectangle is a square cut @ w 1.35 x h 3.52 on real dials size and unlinked at the w&h buttons.
Framed Piece
George
Square
cut @ w 2.85 x h 3.25 on real dial size and unlinked at the w & h buttons.
1st Circle cut @ w 2.71 x h 2.91 on real dial size and unlinked at the w & h buttons.
2nd Circle cut @ w 2.49 x h 2.57 on real dial size and unlinked at the w & h buttons.
Rectangle is a square cut @ w 1.67 x h 3.84 on real dials size and unlinked at the w&h buttons.








Thursday, December 10, 2009

Robin's Santas



Robin, John-Robert's sweetheart, who is a sweetheart, came over today and we spent the afternoon making her Sunday School Class some tin can Santa's... well she did most the work...and claims not to be crafty but she did a wonderful job and we had so MUCH FUN!.... Thank you for looking... Hugs, Jeannie

The Santa's are from Doodle Charms cut @ 3 1/2 inches.
The buckle is a punch.
The cans are those small pineapple juice cans.

Wednesday, December 9, 2009

Christmas 2009

Designed by Jeannie Phillips - Southside AL
Click on any picture to enlarge.


I made this card for my daughter, Madison and her husband, Cory.... its a card... you can trim off the back and keep it as an ornament... I hope that they like it... I must get it in the mail soon!!... thank you so much for looking!  Hugs, Jeannie

CRICUT & GYPSY
Joys of the Season
All Ornament Cuts cut @ h 5.15 the width will be right on all the cuts if you set the height.
The three bottom ornament cuts are shadow cuts, two are welded together.
The two top ornament cuts are regular cuts, on has a George oval in it.
Then there is the layer feature cuts which I Embossed in Gold
On the Cricut  I would cut these @ 5 1/4 inches.
Sweethearts
Couple cut @ w 2 28 x h 2.79
On the Cricut  I would cut them @ 2 3/4 inches.
Opposites Attract
"2009" cut @ h 0.53 on upright feature and welded together.
The width will be right on all the numbers if you set just the height.
On the Cricut I would cut these @ 1/4 an inch.
George
Oval (inside the ornament) cut @ w 2.42 x h 2.69 do NOT weld these two items.
I used the backside of the oval cut for the oval on the inside of the card.
Usinge the Cricut I would cut this with an oval cutter like the one from Making Memories.






Gift Tag / Gift Card Holder

Designed by Jeannie Phillips - Southside, AL
Click on any picture to enlarge.

I bought gift cards  to the movies for my niece and nephew for Christmas.... so I made these so they would be more fun to receive... Hope they like them... they were really easy!! Thank you so much for looking.  Hugs, Jeannie

CRICUT & GYPSY
Very Merry Tags
All Tag Cuts cut @ 4.49 x h 4.50 - On the Cricut I would cut these @ 4 1/4 inches.
George
(for making the slits in the back of the tag)
Circles (one each end) cut @ w 0.35 x h 0.33
Slit is a square cut @ w 0.38 x h 0.24.
 If using the Cricut  I would cut these with a small hole punch and an Exacto Knife
Learning Curve
"names" cut @ h 0.92 setting this height will make all the widths the right size.
On the Cricut  I would cut the letters @ 1 inch.



Monday, December 7, 2009

Gift Box - The Gypsy Spot Design Team Project

Designed by Jeannie Phillips - Southside, AL
Click on any picture to enlarge.
This week at The Gypsy Spot we were to make gift boxes or bags.... I must admit I put this one off for a while.... which is not like me.... well not like me when I am working on my Gypsy Spot challenges or working on cards.... but I am loving this little box...am going to make one more... I have a gift for my daughter and one for my son's girlfriend that will fit perfectly in this fun and easy easy little box... I hope you like it... be sure and visit The Gypsy Spot and see what the other Design Team members have come up with... I am so excited... I am loving their projects!
Hugs and Merry Christmas! Jeannie
CRICUT & GYPSY
Wedding Solutions Cartridge
Pillow Box cut @ w 6.68 x h 6.0 - on the Cricut I would cut this at 6 inches.
Very Merry Tags
Smaller Oval Tags cut @ w 1.26 x h 2.23.
The one without the tree I put on the pillow box to make an oval cut in the box
The one with the tree I cut and used the tree from it to put on the plastic I used behind the oval in the box.
On the Cricut I would cut these @ 2 1/4 inches.
Larger Oval Tags cut @ w 1.72 x h 3.04 - On the Cricut I would cut these at 3 inches.
George
Tiny Circles on the box (to create holes for the ribbon) cut @ 3.3.07 x h 0.35... if i make another one I will make these smaller.
If using the Cricut I would just use a hole punch.

Friday, December 4, 2009

Designed by Jeannie Phillips - Southside, AL
Click on any picture to enlarge.
I am so excited it is supposed to snow tomorrow!!!...Remember this is Alabama... so snow is rare!!! ... and there is no telling if we will get it... but at least there is a chance!!... and I am so excited... so I celebrated with a snowman card... I love the Winter Woodland snowmen... I just love them... they make me just plain happy!!... happy!!... happy!! ... happy!.. thanks so much for looking and I cherish your comments! Hugs, Jeannie
CRICUT & GYPSY
Winter Woodland
Snowman, his shadow and layers all cut @ h 3.24.
If you set the height on these the width will be right on all cuts.
On the Cricut I would cut these @ 3 1/4 inches.
When It's Cold Outside
Snowflake and its shadow cut @ h 3.36.
If you set the height on both the width will be right.
I welded the shadows of the snowmen to the snowflake and the snowflake shadow.
On the Cricut I would cut these @ 3 1/2 inches... you wouldn't have to weld the shadows you could just adhere them directly to the snowflake cuts and get the same effect.

Thursday, December 3, 2009

A Moment in Time

Designed by Jeannie Phillips - Southside, AL
Click on any picture to enlarge.


I have been looking at this little pine cone branch for a while now trying to figure out how to use it... finally I came up with this... hope you like it... all the delegate cuts I trusted only to Basicgrey paper.... it always cuts out so pretty... so the words and that delegate little branch is from a Basicgrey paper pack... the other beautiful paper is from My Minds Eye- A Signature Christmas- Holiday Glitter Pack I am crazy about this paper...its just amazingly beautiful. I hope you like my card! Merry Christmas! .. Hugs, Jeannie

If you are using your Cricut cut these cuts I am doing my best to get the best measurements... I have done this by trial and error...so bare with me while I work out my mistakes..I think I have all the cuts right on this card for the Cricut~ Thanks Jeannie
CRICUT & GYPSY
Joys of the Season
Pine Branch Cut cut @ w 2.28 x h 2.03
Layer feature of this cut the pine cones cut @ w.1.39 x h 2.03.
When you set the height you will get the width.
On the Cricut I would cut both of these at 2 inches.
"Merry Christmas" cut @ w 1.78 x h 1.14.
On the Cricut I would cut this at 1 1/4 inches.
Winter WoodlandBold
Cardinal cut @ w 1.77 x h 1.89.
The layer feature of this cut the black on the bird cut @ w 0.09 x h 1.89.
When you set the height for the layer feature you will get the right width.
On the Cricut I would cut this @ 2 inches... maybe 1 3/4 you could cut one of each and put the one you don't use on the front on the inside of your card.
Mini Monogram
Scalloped Circles cut @ w 3.90 x h 4.31 and w 3.33 x h 3.69.
On the Cricut I would cut these at 3 3/4 inches and 3 1/4 inches.
Circle cut @ w 2.70 x h 3.83.
On the Cricut I would cut this @ 2 3/4 inches.

Wednesday, December 2, 2009

Best Christmas Present Ever!

Designed by Jeannie Phillips - Southside, AL
Click on any picture to enlarge.
On Christmas I did get a puppy... and that was just so grand...so when I thought of this card I remembered that memory.... and it was a good one!... I hope you like this card... its a real quickie and happy. Thank you so much for looking!! Hugs, Jeannie
CRICUT & GYPSY
Christmas Cheer
Presents cut @ w 3.69 x h 3.71 - on the Cricut I would cut these at 3 3/4 inches.
I cut three presents... cut the tops of all of them, added the ribbon... used two bottoms of the box and three of the tops... the bottom layers are popped from the page and each layer from each other.
Bows cut @ w 3.70 x h 3.73 & w 2.97 x h 2.99 - on the Cricut I would cut these at 3 3/4 inches and 3 inches.
I trimmed the ribbon to fit the box bottom and top... cut the bottom of the smaller ribbon off and just used the loops and knot.
Paper Pups
Puppies cut @ w 2.13 x h 3.o - on the Cricut I would cut the puppies @ 3 inches.
I cut the head from one puppy and popped it from the other puppy which is placed between the layers of the box.
Blog Widget by LinkWithin
Thank you so much for signing my Guestbook... I have no idea how to reply to people who do sign in... but I so love it when you do!!... So thank you so much!... if you ever have any questions you can email me @ winacard@gmail.com. I will be happy to answer any questions you might have.

Thank you again for signing my Guestbook~
Jeannie

Please Sign In